Sovol SV08 Core-XY 3D Printer, Up to 700mm/s Speed, 300°C Hotend

Smart Specs & Features

[Max Speed and Precision] - The CoreXY kinematics in SVO8 allow for a max speed of 700mm/s, significantly decreasing moving mass and improving motion control. This results in a maximum acceleration of 40000mm/s². With a spacious 350x350x345mm build volume, it offers ample room for creativity without constraints.

[Open Source Software] - SVO8 is based on the Voron 2.4 design, with an open-source OrcaSlicer that includes arc fitting, variable line width, and spiral ascent. Additionally, it features intelligent cooling, overhang speed reduction, and segmented retraction. The software speeds up printing by optimizing nozzle paths, and its user-friendly interface makes operation simple. It supports various printer configurations.

[Auto Leveling] - The SVO8 comes with Quad-Gantry Auto Leveling (QGL), which uses 4 independent Z motors for smooth leveling. This process enhances printer accuracy, reduces the chance of print failures, and compensates for wear or damage. Automatic pressure sensors adjust the nozzle-to-buildplate distance, ensuring optimal first-layer print quality right after a test print.

[Next-Generation Printing with Klipper] - SV08 uses Klipper firmware to elevate printing speed and accuracy. This firmware significantly enhances processing speed and allows minimizing vibration patterns using 'input Shaping'. 'Pressure Advance' ensures flawless prints, and 'PID Tuning' helps reduce temperature fluctuations in the nozzle and heat bed.

[Ceramic Heating Block & AC Heated Bed] - SV08 heats up to 300°C quickly, reaching 220°C in just 40 seconds. Ceramic heating blocks and an AC heated bed reduce heating time by 70%, allowing for almost instant printing and easy preheating for nozzle cleaning and leveling. Enjoy precise, high-quality prints with versatile material compatibility.

[Rapid Filament Cooling] - SVO8 features a 5020 fan (10000r/min) and a 3010 fan (15000r/min) for optimal filament cooling. Airflow optimized through the air duct blows from three sides towards the filament, ensuring sufficient cooling even during rapid printing. This reduces warping and improves overhangs, enhancing overall print quality.

[All-Axis Linear Rails] - SVO8 uses linear rails for all 7 axes to improve precision and resistance to axial movement deformation. These rails guide the print head and build platform, ensuring accurate positioning and smooth, consistent motion throughout the printing process.

[Built-in Camera & Remote Control] - SVO8 has a built-in camera for real-time monitoring and time-lapse footage capture, offering convenience and insight into the printing process. Connect SV08 to your LAN via WiFi or Ethernet to interact with your printer conveniently and access a range of features.